A long-term multi-purpose outdoor ink designed to print on a wide range of substrates.

GP-0000 Series ink eliminates the need for carrying a large inventory of different types of ink. Ideal for P.O.P. and general display applications where a gloss finish, scuff resistant surface are required.

APPLICATION INFORMATION Subrates: : PAPER AND CARD , WOOD , POLYSTYRENE, VINYLS(PVC), ABS , ACRYLICS , TOP COATED POLYESTER , TYVEK â. Application: P.O.P. / DISPLAY, SIGNS, DECALS.

Thinning : May be used straight from the can but it is HIGHLY recommended to thin 5 - 15% by weight with GP-1800 Thinner. Substitute GP-1800 Thinner with GP-1820 Slow Thinner/Retarder to improve screen stability. For maximum lightfastness or outdoor durability little or no thinning is recommended.

Additives : GP-1700 Clear should only be used to increase transparency of colors . However, this will reduce the durability and lightfastness of the color. To improve scuff resistance add up to 10% GP-1860 Anti-Scuff Agent. Use GP-1350 Overprint Clear to increase scuff resistance or to provide a uniform gloss level to a GP-0000 ink film. Add 5% to 10% of DC-393 Gel Retarder to thinned ink to maintain screen stability. Use a small amount of GP-1730 Process Clear to improve print quality if required.

Wash-Up: GP-1800 Thinner, GP-1840 Wash-Up

Coverage: Approximately 2100 sq.ft./1 U.S. Gallon using a 280/in. monofilament fabric.

Fabric/Stencil: 200 to 355 monofilament fabric. Direct and indirect photostencil or water soluble hand cut stencils are suitable.

Drying: By solvent evaporation. GP-0000 Series dries in 15 to 30 minutes at normal room temperature or can be jet dried 20 to 45 seconds at 150 °F. to 200 °F. Allow more time between prints for multiple color jobs.