Application Technique** For 100% Cotton Discharge : Ryonet's Help Desk & Screen Print Library

Screen Print Library/Screen Printing Inks/Discharge inks

Ryonet Support
posted this on June 22, 2011 02:00 pm

APPLICATION TECHNIQUE** FOR 100% COTTON DISCHARGEABLE

FABRIC WITH REACTIVE DYES

MESH	80-160
STENCIL	A water proof direct emulsion or capillary film should be used for optimal performance.
SQUEEGEE	60-80 Durometer square edge
MIXING	Mix 10% or less pigment with 100% discharge binder making sure to mix pigment into binder before mixing in the Discharge Agent. Discharge Agent should be mixed 10% into 100% discharge binder (by weight). Fixer N can be added to improve wash fastness.
DRYING	Matsui Water-Based Discharge System ink must be heat cured for 2.5 - 3 minutes at 300 to 320 degrees F.
FINISHING	It is highly recommended to wash and dry garments or fabrics before packaging and shipping.
CLEAN UP	Use water and mild soap to wipe screens, screen frames and squeegees and any surfaces in contact with ink.

** It is the responsibility of the printer to test and determine suitability of all products before a production run.

Application techniques may vary.